Ar500 Armox500 PRO500 Armor Bulletproof Steel Plate

• Standard: JIS, DIN, ASTM, AISI
• Application: Loader, Mining Machine, Armored Car
• Material: Steel
• Type: Wear Resistant Plate
• Hardness Range: 370hb-500hb
• Ready Stock: Yes
• Model NO.: steel plate
• Cutting Service: Yes
• Bending Sevice: Yes
• Transport Package: Seaworthy Packaging
• Specification: thickness: 2.5-15mm
• Trademark: customized
• Origin: China
• Production Capacity: 2000tons

Product Description

armor plate  bulletproof plate AR500 ARMOX500 PRO500 equivalent ballistic
Bulletproof plate
Ballistic armours plate,Bulletproof plate
Armor plate
Ballistic steel plate  

 

Bulletproof steel plate propety sheet
Grade	Thickness range (mm)	Hardness	Tensile strength	Yield Strength	Enlogation	90ºcold bending test	,-20ºImpact Value,KV2(J)
BHFD3 (PRO500)	2.0-120	470-550HB	Min 1250Mpa	Min 1100Mpa	Min 7%	R>=8T	>=10
Chemical Composition(%)
C	Si	Mn	P	S	Cr	Mo	Ni	B
<=0.36	<=1.70	<=2.20	<=0.02	<=0.015	<=0.70	<=0.50	<=0.60	<=0.0050

Delivery state
Hot-rolled flat,or finished steel plates by cutting for abnormal shape
Steel plate shape and dimensional deviation fully meet the requirement of GB/T 709-2006
Especially the steel plate thickness deviation can be controlled in actual +0.15mm
Applicable Bulletproof standard

1. The ministry of Pubulic Security of the People's Republic of China.Chinese Military standard(GA164-2005) Protection grade from low to high marks A,B,C

2.NIJ body armor standard
3.The United States UL752 bulletproof standard
4.German DIN52290 bulletproof standard
5.European EN1063 bulletproof standard
6.British BS5051 bulletproof standard

Advantages:
1. Low-alloy micro-alloying,better performance.
2. VD make harmful gases, impurities to a minimum,plate  can be welded, cold bend.
3. Precise hot-rolled plate type: the minimum thickness tolerance, the highest two-way flatness.
4. Self-controlled spray quenching: fine microstructure, hardness distribution

PRO 500 armored bullet-proof steel applications
☆ bullet-proof doors, bullet-proof helmets, body armor, bullet-proof shields; bank counters, confidential safes;
☆ riot cars, bullet-proof armored cars, armored personnel carriers, tanks;
Submarine, landing craft, anti-smuggling boats, helicopters and so on.

Cold bending of armor plate
Follow these guidelines to avoid cracks when cold bending:
Large enough indenter radius and mold fulcrum spacing;
Bending by the tensile side and the edge of the plate must be polished, rounded edges at right angles;
Indenter and mold fulcrum must be smooth;
Particularly necessary when heated to below 250 ºC.