Bulletproof Plate PRO500 Fd3 Armor Plate Ballistic Steel Plate

• Customization: Available
• Standard: JIS, GB, DIN, ASTM, AISI
• Application: Armored Car
• Model NO.: steel plate
• Material: Steel
• Type: Wear Resistant Plate
• Bullet Proof Steel Plate: Armor Plate
• Hardness: 360hb-550hb
• High Strength Steel Plate: Alloy Steel Plate
• Transport Package: Seaworthy Pacakging
• Specification: thickness: 2.5-15mm
• Trademark: customized
• Origin: China
• Production Capacity: 2000tons

Product Description

Bulletproof plate

Ballistic armours plate,pulletproof plate
Armor plate
Ballistic steel plate
Wear resistant steel plate

 

Bulletproof steel plate propety sheet
Grade	Thickness range (mm)	Hardness	Tensile strength	Yield Strength	Enlogation	90ºcold bending test	,-20ºImpact Value,KV2(J)
BHFD3 (PRO500)	2.0-120	470-550HB	Min 1250Mpa	Min 1100Mpa	Min 7%	R>=8T	>=10
Chemical Composition(%)
C	Si	Mn	P	S	Cr	Mo	Ni	B
<=0.36	<=1.70	<=2.20	<=0.02	<=0.015	<=0.70	<=0.50	<=0.60	<=0.0050

Delivery state
Hot-rolled flat,or finished steel plates by cutting for abnormal shape
Steel plate shape and dimensional deviation fully meet the requirement of GB/T 709-2006
Especially the steel plate thickness deviation can be controlled in actual +0.15mm
Applicable Bulletproof standard

1. The ministry of Pubulic Security of the People's Republic of China.Chinese Military standard(GA164-2005) Protection grade from low to high marks A,B,C

2.NIJ body armor standard
3.The United Stateds UL752 bulletproof standard
4.German DIN52290 bulletproof standard
5.Eurpean EN1063 bulletproof standard
6.British BS5051 bulletprood standard

Advantages:
1. Low-alloy micro-alloying,better performance.
2. VD make harmful gases, impurities to a minimum,plate  can be welded, cold bend.
3. Precise hot-rolled plate type: the minimum thickness tolerance, the highest two-way flatness.
4. Self-controlled spray quenching: fine microstructure, hardness distribution

PRO 500 armored bullet-proof steel applications
☆ bullet-proof doors, bullet-proof helmets, body armor, bullet-proof shields; bank counters, confidential safes;
☆ riot cars, bullet-proof armored cars, armored personnel carriers, tanks;
Submarine, landing craft, anti-smuggling boats, helicopters and so on.

Cold bending of armor plate
Follow these guidelines to avoid cracks when cold bending:
Large enough indenter radius and mold fulcrum spacing;
Bending by the tensile side and the edge of the plate must be polished, rounded edges at right angles;
Indenter and mold fulcrum must be smooth;
Particularly necessary when heated to below 250 ºC.